The LH 500 Tractor monitor is a monitor dedicated exclusively to tractors fitted with a DIN/ISO 9486-1/11786 socket.
Fitting the monitor is a simple ”plug & play” exercise. It is virtually just fasten the monitor and connect the plug!
The 62 x 62 mm graphic display provides logical and easy to understand icons, which combined with clear text makes operating the monitor simple. The display makes keeping track of job-notes easy.
You can select an automatic or manual mode for the area override switch from either the 3-point linkage or the PTO engagement switch.
You can however not connect the monitor to any sensors located outside the tractor.
Features
- Forward speed (Km/h)
- Area measure (worked part area)
- Area measure (worked grand total)
- PTO shaft rev. speed PTO shaft rev. speed Traveled distance (meters)
- Work time (total, or active hours) Area ”left to do”
- Warnings, - related to speed, worked area, and area "left"
- Effective work width compensation
- Work efficiency (Ha/hour)
- 10 ”job memory” (notebook)
- Selectable auto or manuel override signal
- All features available simultaneously
- Automatic speed sensor calibration
- Built in system test
-
Note: The full set of the 500 monitor performances requires that the tractor meets the full DIN/ISO standard specification ref. the override & PTO signals. (Ask your tractor dealer)